(920) 662-7605

Used Outboard Parts & Fresh Water Sterndrive Parts

$132.68
3 Blade aluminum propeller for 40-140 horsepower engines with large gear case, 13 tooth spline and thru hub exhaust.

NOTICE!!!!!!!!!!!!!! The pitch of the propeller is extremely important! Ordering the wrong propeller pitch will result in poor performance. All propeller returns are subject to a 15% restocking fee with no refund on shipping charges. This new propeller can only be returned within 14 days of receiving and only if the propeller is not used. If you are not confident in your decision Email or call us we are happy to guide you.

Solas # 2411-130-19
Amita 3
Aluminum
3 blades
13 inch diameter
19 inch pitch
Right Hand rotation (Standard Clockwise Rotation)
Fits 13 Tooth Spline
4 1/4 inch gear case bullet
Rubber Hub System Built In-REQUIRES NO HUB KIT

Solas Amita 3 Aluminum Propeller Features:

Wide blade design specifically for 4-stroke engines
Outstanding acceleration and top speed
Rubber hub for easy installation and excellent gripping force

This Boat Prop fits the following Evinrude Johnson outboard Motors with a 13 spline prop shaft:

40 HP E-TEC…... 2004 & newer
45 HP 2 Cylinder Commercial…….1986 & newer 
50 HP E-TEC……… 2004 & newer 
50 HP 2 Cylinder Pleasure 1971-1974
50 HP 2 Cylinder Commercial 1977-1979
50 HP 3 Cylinder Pleasure…….1994-1999 
55 HP 3 Cylinder…… 1968-1969
55 HP 2 Cylinder Commercial 1980 & newer
55 Hp E-TEC……….2009 & newer
60 HP 3 Cylinder Pleasure……..1970-1971 & 1986-01
60 HP E-TEC………. 2004 & newer 
60 HP 4-stroke…….1998 & newer
65 HP 3 Cylinder Pleasure 1972-1973
65 HP 3 Cylinder Commercial……1984-2001 
65 HP Pontoon Series…..2014 & newer
70 HP 3 Cylinder Pleasure………1974 & newer 
70 HP 4-stroke……. 1998 & newer 
70 HP 3 Cylinder Commercial……… 1974-2001
75 HP 3 Cylinder Pleasure…1975-1984 
75 HP E-TEC……2004 & newer 
V4 outboards:
85 HP 2-Stroke…..1969-1980, 1991-1995 
88 HP 2-Stroke……1981-1996 
90 HP 2-Stroke…..1981 & newer
90 HP E-TEC (20” Shaft)……2004 & newer
90 HP Pontoon series……2014 & newer
100 HP 2-Stroke……..1979-1980, 1988-1993 
110 HP 2-Stroke…..1986-1989 
112 HP 2-Stroke….1994-1996 
115 HP 2-Stroke…….1973 & newer
115 HP E-TEC (20” Shaft)……2004 & newer
120 HP 2-Stroke…….1986-1994 
125 Hp ……1971-1972
130 HP E-TEC (20” Shaft)……2004-2010
135 Hp……1973-1976
140 HP 2-Stroke……1977-1984, 1986-94


Also fits some OMC and Cobra stern drives

Model 400 2.3L - 3.0L
Cobra 2.3L - 3.0L
Sea Drive 1.6L - 1.8L


Why Buy a Solas Aluminum Prop?  
Solas aluminum propellers surpasses regular stainless steel propellers in terms of thinness, corrosion resistance, and quality. Every Solas aluminum prop is squeeze-cast to remove tiny air bubbles that can form in the casting process for increased density and toughness over a traditional die cast aluminum prop. As shown above with 400x magnification of a propeller blade root cross-section the squeeze cast aluminum propeller is almost non-porous, with finer grain size than the die cast aluminum prop.

Each Solas aluminum prop is then finished with 4 layers of paint to ensure superior anti-corrosion properties and to keep your Solas Propeller looking good year after year.

Numerous tests conducted by major media authorities have proven that Solas Propellers stand up to collisions better than the competitors', and long-term durability studies have shown that Solas Propellers' resistance against rust and corrosion outperforms all the others in their class.

Brands & Clients

  • brand
  • brand
  • brand
  • brand
  • brand
  • brand
  • brand
  • brand
  • brand
  • brand
  • brand
  • brand
  • brand
  • brand
  • brand
  • brand
  • brand
  • brand
  • brand
  • brand