14 x 9 Pitch Pontoon Boat Prop for Evinrude Johnson 40-140 Hp Outboard

Categories

Home > Propeller SALE!! > Props For Evinrude Johnson > 40-140 HP 13 Tooth 4 1/4" Gear Case

14 x 9 Pitch Pontoon Boat Prop for Evinrude Johnson 40-140 Hp Outboard

$131.99

NOTICE!!!!!!!!!!!!!! The pitch of the propeller is extremely important! Ordering the wrong propeller pitch will result in poor performance. All propeller returns are subject to a 15% restocking fee with no refund on shipping charges. This new propeller can only be returned within 14 days of receiving and only if the propeller is not used. If you are not confident in your decision Email or call us we are happy to guide you.

Solas # 2411-140-09
Amita 3
Aluminum
3 blades
14 inch diameter
9 inch pitch
Right Hand rotation (Standard Clockwise Rotation)
Fits 13 Tooth Spline
4 1/4 inch gear case bullet
Rubber Hub System Built In-REQUIRES NO HUB KIT

Solas Amita 3 Aluminum Propeller Features:

Wide blade design specifically for 4-stroke engines
Outstanding acceleration and top speed
Rubber hub for easy installation and excellent gripping force

This Boat Prop fits the following Evinrude Johnson outboard motors with a 13 spline prop shaft:

-40 HP E-TEC…... 2004 & newer
-45 HP 2 Cylinder Commercial…….1986 & newer
-50 HP E-TEC……… 2004 & newer
-50 HP 3 Cylinder Pleasure…….1994-99
-55 HP 3 Cylinder…… 1968-69
-55 Hp E-TEC……….2009 & newer
-60 HP 3 Cylinder Pleasure……..1970-1971 & 1986-01
-60 HP E-TEC………. 2004 & newer
-60 HP 4-stroke…….1998 & newer
-65 HP 3 Cylinder Commercial……1984-01
-65 HP Pontoon Series…..2014 & newer
-70 HP 3 Cylinder Pleasure………1974 & newer
-70 HP 4-stroke……. 1998 & newer
-70 HP E-TEC……… 2004 & newer
-75 HP 3 Cylinder Pleasure…1975-1984
-75 HP E-TEC……2004 & newer
-85 HP 2-Stroke…..1969-1980, 1991-1995
-88 HP 2-Stroke……1981-1996
-90 HP 2-Stroke…..1981 & newer (13 tooth)
-90 HP E-TEC (20” Shaft)……2004 & newer (13 tooth)
-90 HP E90 DPL & DSL……2006 & newer (13 tooth)
-100 HP 2-Stroke……..1979-1980, 1988-1993
-110 HP 2-Stroke…..1986-1989
-112 HP 2-Stroke….1994-1996
-115 HP 2-Stroke…….1973 & newer (13 tooth)
-115 HP E-TEC DPL & DSL (20” Shaft)……2004 & newer (13 tooth)
-120 HP 2-Stroke…….1986-1994
-125 Hp ……1971-72
-130 HP E-TEC (20” Shaft)……2004-10 (13 tooth)
-135 Hp……1973-76
-140 HP 2-Stroke……1977-1984, 1986-94

Also fits some OMC and Cobra stern drives

Model 400 2.3L - 3.0L (13 Tooth)
Cobra / Prior to 1978 (13 Tooth)
Sea Drive 1.6L - 1.8L (13 Tooth)

Why Buy a Solas Aluminum Prop?
Solas aluminum propellers surpasses regular stainless steel propellers in terms of thinness, corrosion resistance, and quality. Every Solas aluminum prop is squeeze-cast to remove tiny air bubbles that can form in the casting process for increased density and toughness over a traditional die cast aluminum prop. As shown above with 400x magnification of a propeller blade root cross-section the squeeze cast aluminum propeller is almost non-porous, with finer grain size than the die cast aluminum prop.

Each Solas aluminum prop is then finished with 4 layers of paint to ensure superior anti-corrosion properties and to keep your Solas Propeller looking good year after year.

Numerous tests conducted by major media authorities have proven that Solas Propellers stand up to collisions better than the competitors', and long-term durability studies have shown that Solas Propellers' resistance against rust and corrosion outperforms all the others in their class.

Categories

14 x 9 Pitch Pontoon Boat Prop for Evinrude Johnson 40-140 Hp Outboard

Brands & Clients