(920) 662-7605

Used Outboard Parts & Fresh Water Sterndrive Parts

$179.87
4 Blade aluminum propeller for 90 - 300 horsepower engines with 15 tooth spline and thru hub exhaust.

NOTICE!!!!!!!!!!!!!! The pitch of the propeller is extremely important! Ordering the wrong propeller pitch will result in poor performance. All propeller returns are subject to a 15% restocking fee with no refund on shipping charges. This new propeller can only be returned within 14 days of receiving and only if the propeller is not used. If you are not confident in your decision Email or call us we are happy to guide you.


Solas # 2513-140-23
Amita 4
Aluminum
4 blades
14 inch diameter
23 inch pitch
Right Hand rotation (Standard Clockwise Rotation)
Fits 15 Tooth Spline Propeller shaft.
4 3/4 inch gear case bullet
Rubber Hub System Built In-REQUIRES NO HUB KIT



Solas Amita 4 Aluminum Propeller Features:

Wide blade design specifically for 4-stroke engines
Increased static thrust for heavy loads and maneuverability
Great stern lift and mid-range performance
Rubber hub for easy installation and excellent gripping force

This boat prop fits the following Evinrude/Johnson outboards:
90 HP V4 (inlcudes DPX) 1995 & newer
90 HP E-TEC (25" shaft) 2004 & newer
100 HP V4 Commercial 1984 & newer
100 HP 2004 & newer
115 HP V4 (includes DSX,DPX,DCX) 1995 & newer
115 HP E-TEC 25"shaft 2004 & newer
115 HP Pontoon series 2014 & newer
120-140 HP V4 1985
130 HP V4 1995-1996
130 HP E-Tec 25" shaft 2009-2010
135 HP V6 2014 & newer
140 HP 25" shaft 1989-1994
150 HP V6 includes E-Tec 1978 & newer
150 HP V6 Commercial 1993 & newer
150 HP Pontoon series 2014 & newer
155 HP V6 Commercial 1978 & newer
175 HP V6 includes E-Tec 1977 & newer
185 HP V6 1984-1985
200 HP V6 includes E-Tec 1976 & newer
225 HP V6 includes E-Tec 1986 & newer
235 HP V6 1978-1985
250 HP V8 includes E-Tec 1991 & newer
250 HP V6 includes E-Tec 2001 & newer
275 HP V8 1986-1988
300 HP V8 includes E-Tec 1988-1995, 2009 & newer
2.6 L V6 1984-1985
3.6 L V8 1986-1987

Also fits the following OMC & Cobra stern drives, Inboard/outboards (Non SX drives):
OMC Model 800
King Cobra
Cobra (non-SX drive) 3.0L - 8.2L
Sea Drive 2.0L - 4.0L

Why Buy a Solas Aluminum Prop?
Solas aluminum propellers surpasses regular stainless steel propellers in terms of thinness, corrosion resistance, and quality. Every Solas aluminum prop is squeeze-cast to remove tiny air bubbles that can form in the casting process for increased density and toughness over a traditional die cast aluminum prop. As shown above with with 400x magnification of a propeller blade root cross-section the squeeze cast aluminum propeller is almost non-porous, with finer grain size than the die cast aluminum prop.

Each Solas aluminum prop is then finished with 4 layers of paint to ensure superior anti-corrosion properties and to keep your Solas Propeller looking good year after year.

Numerous tests conducted by major media authorities have proven that Solas Propellers stand up to collisions better than the competitors', and long-term durability studies have shown that Solas Propellers' resistance against rust and corrosion outperforms all the others in their class.

Brands & Clients

  • brand
  • brand
  • brand
  • brand
  • brand
  • brand
  • brand
  • brand
  • brand
  • brand
  • brand
  • brand
  • brand
  • brand
  • brand
  • brand
  • brand
  • brand
  • brand
  • brand